Products
-
Electric water inline heater 50KW
10 years CN supplier
Power Source: electric
Warranty: 1 Year
-
Thermal Oil Furnace for Bituminous Concrete
Electric Thermal Oil Furnace is a new type, safety, high efficiency and energy saving, low pressure (under normal pressure or lower pressure) and can provide high temperature heat energy special industrial furnace Transfer heat to heat-using equipment.
-
Industrial Water Circulation Preheating Pipeline Heater
An pipeline heater is composed of an immersion heater covered by an anti-corrosion metallic vessel chamber. This casing is mainly used for insulation to prevent heat loss in the circulation system. Heat loss is not only inefficient in terms of energy usaage but it would also cause unnecessary operation expenses.
-
Explosive-proof Pipeline Heater
Pipeline heater is a kind of energy-saving equipment that pre heats the material. The pipeline heater can be divided into two modes: one is to use the flange type tubular electric heating element inside the pipeline heater to heat the conduction oil in the reactor jacket in the pipeline heater, and transfer the heat energy in the pipeline heater to the chemical raw materials in the reactor inside the pipeline heater Another way is to insert the tubular electric heating elements in the tubular heater directly into the reactor in the tubular heater or evenly distribute the electric heating tubes around the wall of the tubular heater.
-
ISG Series Vertical Clean Water Centrifugal Pump
ISG Series Vertical Clean Water Centrifugal Pump also been called pipeline pump, centrifugal pump, pipeline centrifugal pump, single stage centrifugal pump, vertical pump, booster pump, hot water pump, circulating pump, pump, etc., IS an expert in this unit of science and technology personnel joint domestic pump chooses excellent hydraulic model, adopt IS type of centrifugal pump performance parameters, on the basis of the general vertical pump to design ingenious combination becomes.At the same time according to different use, such as temperature, medium on the basis of type ISG sent for pump, hot water pump, temperature and corrosive chemical pump, oil pump.
-
High quality control cabinet
Control cabinet is the box which is used to control temperature, containing temperature control device, the output voltage level will be changed when the the tap of the auto-transformer changed, so as to achieve the speed of the fan also change the temperature. The main body of the case is made of high quality aluminum alloy profiles, with strong structure, beautiful appearance, good heat dissipation performance and other characteristics, And, equipment with phase-lack protection,phase protection,voltage protection,oil temperature,liquid level,high-low pressure,motor overload,protective module,flow protection,idle away protection etc.
-
High temperature resistance anti corrosion fan boiler centrifugal blower fan
-Advance design, according to the boiler industry professional research
-High temperature resistance, high efficiency, high air volume, low vibration, low noise -
40KW Air Circulation Heater for Paint Spray Booth
Electric Air Duct Heaters uses electric power as energy to convert electric energy into heat energy via electric heating element. The heating element of the air heater is a stainless steel heating tube, which is made by inserting electric heating wires into a seamless steel tube, filling the gap with magnesium oxide powder with good thermal conductivity and insulation, and shrinking the tube.
-
High quality Ceramic Finned Air Strip Heater
Ceramic Finned Air Strip Heaters are constructed of heating wire, mica insulation plate, seamless stainless steel sheath and fins, It can be finned to improve heat transfer. The fins are specially designed to provide maximum surface contact for good heat dissipation into the finned cross sections, thus resulting in rapid heat transfer to the air.
-
Stainless steel high temperature surface type k thermocouple
Thermocouple is a common temperature measuring element. The principle of thermocouple is relatively simple. It directly converts the temperature signal into a thermoelectromotive force signal and converts it into the temperature of the measured medium through an electrical instrument.
