For gas heating
When using a cartridge heater in gas environment, it is necessary to ensure that the installation position is well ventilated, so that the heat emitted from the surface of the heating tube can be quickly transmitted out. The heating pipe with high surface load is used in the environment with poor ventilation, which is easy to cause the surface temperature to be too high and may cause the pipe to burn out.
For liquid heating
It is necessary to select the cartridge heater according to the medium of the heating liquid, especially the corrosion solution to select the pipe according to the corrosion resistance of the material. Secondly, the surface load of the heating tube should be controlled according to the medium in which the liquid is heated.
For mold heating
According to the size of the cartridge heater, reserve the installation hole on the mold (or customize the outer diameter of the heating pipe according to the size of the installation hole). Please minimize the gap between the heating pipe and the installation hole as far as possible. When processing the installation hole, it is recommended to keep the unilateral gap within 0.05mm.
Post time: Sep-15-2023
