How to wire flange heating pipe?

To properly connect a flange heating pipe, follow these steps:

1. Prepare tools and materials: Prepare required tools such as screwdrivers, pliers, etc., as well as appropriate cables or wires, ensuring they have sufficient carrying capacity and temperature resistance.
2. Disconnect the power supply: Before starting any work, you must first ensure that the heating tube has been disconnected from the power supply to ensure safety.
3. Check the heating tube: Check whether the electrode of the heating tube is intact and there are no exposed parts to ensure safety.
4. Strip the cable insulation layer: According to the electrode diameter and length of the heating tube, peel off the appropriate length of cable insulation layer. Make sure you strip the appropriate length and be careful not to damage the cores of the cable.
5. Connect the electrode: Wrap the stripped cable core wire tightly around the electrode of the heating tube, and then fix it with pliers or a screwdriver. Make sure the connection is firm and the contact is good.
6. Insulation treatment: In order to prevent short circuit and electric shock, the exposed parts of the cable need to be wrapped with insulating materials such as heat shrink tubing or insulating tape.
7. Test: After completing the wiring, a test should be performed to check whether the heating tube is working properly. You can turn on the power and observe the reaction of the heating tube. If there is no problem, it means the wiring is correct.
8. Pay attention to safety: During operation, you should always pay attention to safety and avoid direct contact with the heating tube to prevent burns. At the same time, the work area should be kept clean and tidy to prevent debris and dust from affecting the wiring quality.
With the above steps, you should be able to connect the flange heating tube correctly. Remember, any electrical work should be done with the power turned off to ensure safety. If you are not familiar with wiring, it is recommended to ask a professional electrician to perform the operation.